KB Electronics KBAC-27D, Techtop Motor & Drive Package Belt Grinder VFD 2X72 56C

Description

Drive Specifications:
Maximum Power
1-1/2 HP (115V)
1.13 kW (115V)
2 HP (208-230V)
1.5 kW (208-230V)
Input Voltage
115/208-230 Volt
Input Frequency
50/60 Hz
Input Phase
Single Phase
Max AC Line Current
22 Amps @ 115 Volts
16.7 Amps @ 230 Volts
Output Voltage Range
0-208/230 VAC
Max Load Current
5.5 Amps/Phase @ 115 Volts
6.7 Amps/Phase @ 230 Volts
Net Weight
10.3 lbs
4.7 kg
Dimensions
7.69" x 9.82" x 7.36"
195mm x 249mm x 187mm
Enclosure Rating
NEMA 4X, IP65
Enclosure Color
Gray
UPC
024822095204
Drive & Motor Options:
All packages include a KB Electronics KBAC-27D, Model 9520 Drive.
• Techtop GR3-AL-TF-56C-4-B-D-1.5
1.5HP, 1800RPM
, TEFC/IP55,
56C
Frame, 208-230/460V 3-Phase Motor
• Techtop GR3-AL-TF-56C-2-B-D-1.5
1.5HP, 3600RPM
, TEFC/IP55,
56C
Frame, 208-230/460V 3-Phase Motor
• Techtop GR3-AL-TF-56C-4-B-D-2
2HP, 1800RPM
, TEFC/IP55,
56C
Frame, 208-230/460V 3-Phase Motor
•
Techtop GR3-AL-TF-56C-2-B-D-2
2HP, 3600RPM
, TEFC/IP55,
56C
Frame, 208-230/460V 3-Phase Motor
All Motors can be mounted in F1, F2 or F3. Shaft size is 5/8" with 3/16" key
Additional Switch Options:
•
None
: No additional switches included
•
KB Electronics 9480
Forward-Stop-Reverse Switch Kit
•
KB Electronics 9523
Power Switch Kit
•
Power & For-Stop-Rev Switch Kits
includes both 9480 & 9523 kits listed above.
Cord (Drive to Motor) Option:
•
None
: No cord (drive to motor) included
•
10' 14/4 SO Cord Set
includes 10' of SO Cord, 14 Gauge, 3 Conductor + Ground and appropriate water tight fittings for the drive and motor. Cord can be shortened as needed.
Power Cord Options:
•
None
: No power cord included
•
10' 14/3 SO Cord/115V Plug Set
includes 10' of SO Cord, 14 Gauge, 2 Conductor + Ground and appropriate water tight fitting for the drive. Also included is a 115V Molded Plug. Cord can be shortened as needed. 115V In is not supported by the drive when using the 2HP Motor.
If
'Wired, Assembled & Ready to Go' Option is selected below, drive will be wired for 115V
•
10' 14/3 Cord/No Plug
includes 10' of SO Cord and appropriate water tight fitting for the drive. No plug is included. If
'Wired, Assembled & Ready to Go' Option is selected below, the drive will be wired for 230V
'Wired, Assembled & Ready to Go' Option:
•
NO
: You will receive a package with all of your selected components inside. You will be responsible to set the drive jumpers to their correct settings, install all fittings and wire the drive and motor.
•
YES
: We will assemble and wire the drive and motor for you based on the options you choose from this listing. You will receive a package that is ready to run right out of the box. You may need to tweak some drive settings depending on your application. If you want any of your selected cord options shortened, we need to know at time of sale! This is a labor only option; no additional cords or switches are
added when you select this option.